POLYAMIDE 12 TUBES FOR AIR BRAKE AND LUBRICATION LINES DIN 74324
PA12 tubing produced according to DIN 73378 and DIN 74324.
Specifically indicated for automotive applications, including air brake and lubrication lines for trucks and vehicles in general.
Good elastic properties and resistant to abrasion. Light and heat stabilised. Standard product is in flexible grade but there are also rigid and semi-rigid grades in relation to the desired flexibility and pressure rating. lt has a good resistance to chemical agents, very low water absorption and gas permeability.
- Working temperature: from -40°C to + 80°C with peaks up to 100°C
- Working pressure is calculated with safety factor 3:1
- Standard coil length: 100 m.
- Standard colour: black
- For availability of other coil lengths or colours, please contact our sales department.
- Main applications: Pneumatic brake lines, lubrication and fuel lines.
- Tolerances on I.D.: +/-0,1 mm.
- Tolerances on O.D.: up to dia. 12 mm. +/-0,1 mm. Larger sizes +/-0,2 mm.
PA12 BRAKE is available in the following range:
| Part Nr. | Inside diameter (I.D.) [mm] | Outside diameter (O.D.) [mm] | Working pressure (W.P.) [bar] | Bending radius [mm] | Weight per Coils of 100 m [kg] |
|---|---|---|---|---|---|
| TG506416 | 2 | 4 | 40 | 20 | 1,00 |
| TG513916 | 3 | 6 | 50 | 40 | 2,20 |
| TG501016 | 4 | 6 | 27 | 30 | 1,70 |
| TG534116 | 4 | 8 | 45 | 60 | 3,90 |
| TG511116 | 5 | 8 | 28 | 50 | 3,20 |
| TG501216 | 6 | 8 | 19 | 40 | 2,30 |
| TG512316 | 6 | 10 | 30 | 80 | 5,20 |
| TG505216 | 7 | 10 | 25 | 60 | 4,10 |
| TG501516 | 8 | 10 | 15 | 60 | 3,00 |
| TG505416 | 8 | 12 | 26 | 80 | 6,60 |
| TG501816 | 9 | 12 | 17 | 70 | 5,20 |
| TG501916 | 10 | 12 | 11 | 70 | 3,60 |
| TG502116 | 11 | 14 | 14 | 85 | 6,20 |
| TG502216 | 12 | 14 | 10 | 85 | 4,30 |
| TG502316 | 12 | 15 | 15 | 90 | 6,70 |
| TG507716 | 12 | 16 | 20 | 95 | 9,20 |
| TG502916* | 16 | 20 | 14 | 160 | 6,00 |
| *Coil of 50 mt. |
| Part Nr. | Inside diameter (I.D.) [mm] | Outside diameter (O.D.) [mm] | Working pressure (W.P.) [bar] | Bending radius [mm] | Weight per Coils of 100 m [kg] |
|---|---|---|---|---|---|
| TG506416 | 2 | 4 | 40 | 20 | 1,00 |
| TG513916 | 3 | 6 | 50 | 40 | 2,20 |
| TG501016 | 4 | 6 | 27 | 30 | 1,70 |
| TG534116 | 4 | 8 | 45 | 60 | 3,90 |
| TG511116 | 5 | 8 | 28 | 50 | 3,20 |
| TG501216 | 6 | 8 | 19 | 40 | 2,30 |
| TG512316 | 6 | 10 | 30 | 80 | 5,20 |
| TG505216 | 7 | 10 | 25 | 60 | 4,10 |
| TG501516 | 8 | 10 | 15 | 60 | 3,00 |
| TG505416 | 8 | 12 | 26 | 80 | 6,60 |
| TG501816 | 9 | 12 | 17 | 70 | 5,20 |
| TG501916 | 10 | 12 | 11 | 70 | 3,60 |
| TG502116 | 11 | 14 | 14 | 85 | 6,20 |
| TG502216 | 12 | 14 | 10 | 85 | 4,30 |
| TG502316 | 12 | 15 | 15 | 90 | 6,70 |
| TG507716 | 12 | 16 | 20 | 95 | 9,20 |
| TG502916* | 16 | 20 | 14 | 160 | 6,00 |
| *Coil of 50 mt. |